TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 130 of 680
TB 9-2320-335-13&P 3-48 3-80.3. GEARED FAN DRIVESHAFT MAINTENANCE (SERIAL NUMBERS 300000 AND ABOVE) This task covers: a. Removal c. Installation b. Inspection INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Sealing compound (Appendix C, Item 71) Manual References TM 9-2320-387-10 TB 9-2320-335-13&P, Appendix E Equipment Condition • Hood raised and secured (TM 9-2320-387-10). • Upper fan shroud removed (para. 3-62.2). Maintenance Level Unit NOTE Rotate crankshaft pulley accordingly to access capscrews. 1. Remove six capscrews (1) and geared fan driveshaft (8) from geared fan drive (6). 2. Remove four capscrews (7) and geared fan driveshaft (8) from coupler plate (3). NOTE • Rotate crankshaft pulley accordingly to access capscrews. • Hold alternator clutch pulley adapter to keep crankshaft from rotating. 3. Remove four capscrews (4) and coupler plate (3) from lower crankshaft pulley assembly (5). 4. Remove four grease fittings (2) from geared fan driveshaft (8). Inspect grease fittings (2). Replace if damaged. 1. Install four grease fittings (2) on geared fan driveshaft (8). NOTE • Rotate crankshaft pulley accordingly to access capscrews. • Hold alternator clutch pulley adapter to keep crankshaft from rotating. 2. Install coupler plate (3) on lower crankshaft puller assembly (5) with four capscrews (4). 3. Install geared fan driveshaft (8) on coupler plate (3) with four capscrews (7). 4. Apply sealing compound to six capscrews (1). Install geared fan driveshaft (8) on geared fan drive (6) with six capscrews (1). c. Installation b. Inspection a. Removal