TB-9-2320-335-13&P HMMWV Operator and Field Maintenance, Parts, Tools M1151A1 M1152A1 M1165A1 Download
Page 122 of 680
TB 9-2320-335-13&P 3-40 CAUTION ______ Ensure water pump P/N 23500085 is used on 6.5L engines or damage to equipment will result. 1. Install gasket (6) and adapter plate (7) on water pump (5) with seven capscrews (8). Tighten capscrews (8) to 13-20 lb-ft (18-27 N•m). NOTE Perform step 2 if a new water pump is being installed. 2. Apply sealing compound to rivet (3) and install in water pump (5). 3. Apply anaerboic gasket sealer to sealing surfaces on adapter plate (7) following diagram shown. 4. Apply pipe sealing compound to capscrew (16). 5. Install adapter plate (7) and water pump (5) on timing gear cover (10) with two long studs (19), stud (14), stud with thick hex (13), and capscrew (16). 6. Install two capscrews (15), studs (9), four washers (18), and capscrews (17). Tighten studs (9) and capscrews (15) and (17) to 13-20 lb-ft (18-27 N•m). Tighten studs (19), (14), and (13) to 25-37 lb-ft (34-50 N•m). 7. Apply pipe sealing compound to threads of elbow (1), heater hose nipple (2), and bypass hose adapter (4) and install in water pump (5). 8. Coat threads of bypass nipple (12) with pipe sealing compound and install in water crossover (11). 3-78. WATER PUMP AND ADAPTER PLATE MAINTENANCE (Cont'd) c. Installation