TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 97 of 168
5-73 TB 9-2320-280-35-15 33-3. Pull DAGR antenna cable (6) through hole (17) in left-side outer windshield frame (2). Split one side of grommet (16). Place grommet (16) on cable (6) and insert grommet (16) in hole (17) in left-side outer windshield frame (2). 33-4. Using DAGR antenna mount (7) as a template, locate, mark, and drill two 0.391-in. diameter holes (18) in QEAM rack (12). 33-5. Install DAGR antenna (5) to DAGR mount (7) with capscrew (23) and washer (24). 33-6. Install DAGR mount to QEAM rack with two capscrews (11), washers (10), spacers (13), lockwashers (19), and nuts (20). 33-7. Route antenna cable (6) up through DAGR antenna mount (7). 33-8. Attach DAGR antenna cable (6) to DAGR antenna (5). 33-9. Secure DAGR antenna cable (6) to DAGR mount (7) with loop clamp (9), capscrew (21), washer (22), and nut (8). 33-10. Secure DAGR antenna cable (6) to QEAM rack (12) with loop clamp (14) and self-tapping screw (15). Figure 5-87. 5. DAGR ANTENNA – N/A – QTY. 1 6. DAGR ANTENNA CABLE – 426-0141-050 – QTY. 1 8. NUT – TO COME – QTY. 1 9. LOOP CLAMP – TO COME – QTY. 1 10. WASHER – MS2436161 – QTY. 2 11. CAPSCREW – B1821BH025C100N – QTY. 2 13. SPACER – N/A – QTY. 1 14. LOOP CLAMP – MS21333-98 – QTY. 1 15. SELF-TAPPING SCREW – 9421073 – QTY. 1 16. GROMMET – MS35489-143 – QTY. 1 19. LOCKWASHER – MS35338-48 – QTY. 2 20. NUT – 9419143 – QTY. 2 21. CAPSCREW – TO COME – QTY. 1 22. WASHER – TO COME – QTY. 1 23. SCREW – 160035 – QTY. 1 24. WASHER – 9417373 – QTY. 1 ~ ~ 5 6 7 8 9 10 11 12 13 14 15 18 19 20 16 17 2 23 24 21 22 8.50