TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 96 of 168
5-72 TB 9-2320-280-35-15 Section XXXIII. ANTENNA AND CABLE INSTALLATION (WITHOUT BOLT-ON ARMOR) NOTE • DAGR shown, PLGR similar. • Drilled holes on inside and outside of windshield frame should be aligned with each other to allow routing of DAGR cable through windshield frame. • Relocate all caution labels as necessary. • Drilled holes on inside and outside of windshield frame should be aligned with each other to allow routing of DAGR cable through windshield frame. • Use left side plug as reference point to measure hole for antenna cable. 33-1. Locate, mark, and drill 0.375-in. diameter hole (1) in outer right-side windshield frame (2). 33-2. Locate, mark, and drill 0.375-in. diameter hole (3) in inner right-side windshield frame (4). Figure 5-85. 2 1 ~ Figure 5-86. ~ 3 4 1.25 5.12 0.75 3.00