TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 94 of 168
5-70 TB 9-2320-280-35-15 Section XXXI. DAGR BRACKET INSTALLATION 31-1. Install DAGR bracket (11) on integrated rack (1) with three screws (12) and lockwashers (13). 31-2. Locate, mark, and drill one 0.201-in. diameter hole (10) in right-side engine tunnel (9). 31-3. Remove paint from vicinity of hole (4) on integrated rack (1) and hole (10) on right-side engine tunnel (9). Apply anti-seize compound as required. 31-4. Fabricate ground strap (5) from 8.00-in. length of braided wire and two terminal lugs. 31-5. Install ground strap (5) on integrated rack (1) with capscrew (6), three lockwashers (2), and nut (3). 31-6. Install ground strap (5) on right-side engine tunnel (9) with self-tapping screw (8) and two lockwashers (7). Figure 5-83. ~ ~ 1 2 3 4 2 5 6 7 8 9 10 11 12 13