TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 79 of 168
TB 9-2320-280-35-15 5-55 Figure 5-64. 6 13 10 9.75 EPLRS MOUNTING PLATE 9 ~ ~ ~ NOTE • Remove left rear side rail, if necessary. (Refer to TM 9-2320-280-20.) • Front edge of upper antenna plate should be approximately 9.75 in. from edge of front bolts in wheelhouse. 26-3. Locate screw (9) on left rear wheelhouse (13), and drill out rivet (10) from left rear wheelhouse (13). Enlarge hole to 0.281 in. 26-4. Position support plate (8) underneath wheelhouse (13) and drill two 0.281-in. diameter holes (11). 26-5. Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (7) and three 0.408-in. holes (12) in left rear wheelhouse (13). 6. ANTENNA PLATE – A3104004-1 – QTY. 1 8 7 7 7 7 11 12