TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 76 of 168
TB 9-2320-280-35-15 5-52 NOTE Perform step 25-10 only if not installing cargo soft-top enclosure; otherwise, start with step 25-11. 25-10. Install antenna (27) on antenna mount assembly (25) with four capscrews (26), gasket (28), eight lockwashers (33), and four nuts (32). NOTE Perform steps 25-11 and 25-12 only when installing cargo soft-top enclosure. 25-11. Install cargo soft-top enclosure (34). (Refer to TM 9-2320-280-10.) NOTE Ensure all slack has been taken out of cargo soft-top enclosure, and that cargo soft-top enclosure has been properly installed. 25-12. Using antenna (27) as template, locate, mark, and drill four 0.375-in. holes (35) and cut “X” (36) in cargo soft-top enclosure (34). 25-13. Install antenna (27) on antenna mount assembly (25) and cargo soft-top enclosure (34) with four capscrews (26), gasket (28), eight lockwashers (33), and four nuts (32), ensuring that ground strap (31) is inserted through cut hole (36). 25-14. Install ground strap (31) on antenna mount assembly (25) with screw (30), three lockwashers (29), and nut (20). 25-15. Tighten all nuts (20) and (32). Figure 5-61. 20. NUT – 9419143 – QTY. 1 26. CAPSCREW – B1821BH038C150N – QTY. 4 27. ANTENNA – A3005031 – QTY. 1 28. GASKET – A3013655-1 – QTY. 1 29. LOCKWASHER – MS45904-68 – QTY. 3 30. CAPSCREW – B1821BH025C075N – QTY. 1 31. GROUND STRAP – QTY. 1 32. NUT – 13218E0320-293 – QTY. 4 33. LOCKWASHER – MS45904-76 – QTY. 8 26 33 28 27 31 33 32 34 ~ 31 20 29 32 33 26 27 28 25 30 29 33 35 35 36