TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 74 of 168
TB 9-2320-280-35-15 5-50 Figure 5-59. 6 NOTE • Remove right rear side rail, if necessary. (Refer to TM 9-2320-280-20.) • Front edge of upper antenna plate should be approximately 9.75 in. from edge of front bolts in wheelhouse. 25-3. Locate screw (11) on right rear wheelhouse (8) and drill out rivet (10) from right rear wheelwell (8). Enlarge hole to 0.281 in. 25-4. Position support plate (12) underneath wheelhouse (8) and drill two 0.281-in. diameter holes (13). 25-5. Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (7) and three 0.408-in. holes (9) in left rear wheelhouse (8). 6. ANTENNA PLATE – A3104004-2 – QTY. 1 9 8 11 10 12 13 ~ ~ 9.75 7 7 7 7 7