TB-9-2320-280-35-15 HMMWV Technical Bulletin Installation for Retransmission EPLRS Network Manager Download
Page 34 of 168
TB 9-2320-280-35-15 5-10 7-16. Secure three 24V fuse wire assemblies (25) and one 12V fuse wire assembly (3) to B-beam (22) with four self-tapping screws (36). NOTE For models equipped with power stud, perform step 7-17. Otherwise, proceed to step 7-18. 7-17. Secure 24V terminal board power wire terminal lug (28) to power stud (40) with lockwasher (38) and existing nut (39). 7-18. Secure 24V terminal board power wire terminal lug (28) to terminal board (37) with lockwasher (38) and existing nut (39). 7-19. Install decal (35) on B-beam (22). 7-20. If previously removed, install right-hand rear fixed door. (Refer to TM 9-2320-280-20.) 7-21. Install batteries. (Refer to TM 9-2320-280-20.) Figure 5-13. 35 22 36 28 37 38 39 3 28 40 38 39 35. DECAL – 12339060 – QTY. 1 36. SELF-TAPPING SCREW – 12342499-2 – QTY. 4 38. LOCKWASHER – MS35338-48 – QTY. 1 25 ~