TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 97 of 148
5-75 TB 9-2320-280-35-14 Figure 5-95. 6 NOTE • Remove right rear side rail, if necessary. (Refer to TM 9-2320-280-20.) • Front edge of upper antenna plate should be approximately 9.75 in. from edge of front bolts in wheelhouse. 27-3. Locate screw (11) on right rear wheelhouse (8) and drill out rivet (10) from right rear wheelhouse (8). Enlarge hole to 0.281 in. 27-4. Position support plate (12) underneath left rear wheelhouse (8) and drill two 0.281-in. diameter holes (13). 27-5. Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (7) and three 0.408-in. holes (9) in left rear wheelhouse (8). 6. ANTENNA PLATE – A3104004-1 – QTY. 1 9 8 11 10 12 ~ 9.75 7 7 7 7 7 13 ~