TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 89 of 148
5-67 TB 9-2320-280-35-14 24-24. Position grommet (52) in access hole (49). 24-25. Route cables (12), (15), and (29) under fixed rear door (48) and along rear perimeter of left rear seat back support (50). Secure with three loop clamps (26), screws (55), lockwashers (53), and plain-assembled nuts (54). 24-26. Route cables (12), (15), and (29) through access hole (49) and grommet (52). 24-27. Secure cables (12), (15), and (29) to left rear wheelhouse (46) with four clamps (26) and self-tapping screws (25). 24-28. Take slack out of cables and store under EPLRS mount assembly (45). 24-29. Tighten screws and nuts on clamps. 24-30. Secure right-side tunnel insulation. (Refer to TM 9-2320-280-20.) Figure 5-88. 25. SELF-TAPPING SCREW – 9421073 – QTY. 4 26. LOOP CLAMP – MS21333-77 – QTY. 7 52. GROMMET – MS35489-24 – QTY. 1 53. LOCKWASHER – MS35338-43 – QTY. 3 54. NUT, PLAIN-ASSEMBLED – 9422771 – QTY. 3 55. SCREW – MS35206-265 – QTY. 3 12 15 29 46 45 ~ 49 52 48 ~ 50 26 53 54 26 26 53 54 53 54 ~ 55 25 25 26 26