TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 76 of 148
5-54 TB 9-2320-280-35-14 Figure 5-72. Figure 5-73. 1 2 ~ Section XXIII. EPLRS ANTENNA INSTALLATION (TWO-MAN VEHICLES) NOTE Perform following procedures for a two-man vehicle configuration only. 23-1. Enlarge four holes (2) on antenna base bracket (1) to 0.343-in. diameter and remove paint from vicinity. 1. ANTENNA BASE BRACKET – A3050655-1 – QTY. 2 3. ANTENNA OVERCAB MOUNT – A3265061 – QTY. 1 4. LOCKWASHER – MS45904-72 – QTY. 16 5. SCREW – B1821BH031F100N – QTY. 8 7. NUT – 9418892 – QTY. 8 NOTE Perform steps 23-2 and 23-3 on left and right side of antenna overcab mount. 23-2. Using antenna base bracket (1) as template, align access holes of antenna base bracket (1) and antenna overcab mount (3). Mark and drill four 0.343-in. diameter holes (6) in antenna overcab mount (3). 23-3. Remove paint from vicinity of four mounting holes (6) on antenna overcab mount (3). Apply anti-seize compound as required. 23-4. Install two antenna base brackets (1) on front side of antenna overcab mount (3) with eight screws (5), sixteen lockwashers (4), and eight nuts (7). 1 1 5 4 3 4 7 6