TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 63 of 148
5-41 TB 9-2320-280-35-14 NOTE It may be necessary to drill four 0.147-in. holes in right wheelhouse/utility area before performing step 18-9. 18-9. Route antenna cable (17) up B-beam. Secure with tape until antenna and cable are installed in Section XXV. 18-10. Route antenna cable (6) along right rear seat/utility area with four self-tapping screws (20) and loop clamps (21). 18-11. Route antenna cable (6) through right wheelhouse/utility area with existing grommet, retainer, screws, and plain-assembled nuts. (Refer to TM 9-2320-280-20.) 20 6 6 17 21 20. SELF-TAPPING SCREW – 1234299-1 – QTY. 4 21. LOOP CLAMP – MS21333-75 – QTY. 4 21 Figure 5-58.