TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 54 of 148
5-32 TB 9-2320-280-35-14 Figure 5-50. Figure 5-49. 16-10. Secure ground strap (17) to antenna base (16) and position antenna base (16) on antenna mounting bracket (5). 16-11. Install terminal lug (18) on ground strap (17). 16-12. Remove bottom capscrew (6) and three lockwashers (2) from antenna mounting bracket (5). Secure antenna ground strap (17) to right rear wheelhouse (3) and antenna mounting bracket (5) with existing capscrew (6), three lockwashers (2), and nut (1). 16-13. Install antenna base (16) on antenna mounting bracket (5) with four capscrews (14) and four lockwashers (15). NOTE Ensure antenna adapter tilts fore and aft of vehicle after tightening. 16-14. Install antenna adapter (19) on antenna base (16) by screwing on until tight. 16-15. Secure antenna adapter (19) to antenna base (16) with existing clamp (20). 1 2 15 3 14 5 16 17 6 ~ 2 18 2 19 20 16 2. LOCKWASHER – MS45904-72 – QTY. 1 14. CAPSCREW – B1821BH038F175N – QTY. 4 15. LOCKWASHER – MS45904-76 – QTY. 4 16. ANTENNA – 4245 – QTY. 1 18. TERMINAL LUG – MS20659-108 – QTY. 1 19. ANTENNA ADAPTER – RF-1980-AT001 – QTY. 1