TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 50 of 148
5-28 TB 9-2320-280-35-14 NOTE Ensure convoluted tubing is cut straight and even to allow proper fit of locking collar. 15-9. Install locking collar (16) on one end of convoluted tubing (17). 15-10. Place convoluted tubing and grommet assembly (17) in hole (18) in right wheelhouse (2), through wheelhouse (2), and through hole (5) in right wheelhouse (1). Mark convoluted tubing (17) at proper length. 15-11. Remove convoluted tubing (17) from wheelhouse (2) and cut to proper length. NOTE Ensure convoluted tubing is cut straight and even to allow proper fit of locking collar. 15-12. Install locking collar (16) on other end of convoluted tubing (17). 15-13. Place convoluted tubing and grommet assembly (17) in hole (5) in top of right wheelhouse (2), through wheelhouse (2), and through hole in rear wall (18). Secure convoluted tubing (17) to rear wall (18) with nylon nuts (19). 17 18 2 ~ Figure 5-44. Figure 5-42. 17 16 16. LOCKING COLLAR – Z52-0013-002 – QTY. 2 17. CONVOLUTED TUBING – Z52-0013-001 – QTY. 1 19 19 2 18 5 17 ~ 19. NYLON NUT – 10075-1397 – QTY. 2 Figure 5-43.