TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 105 of 148
5-83 TB 9-2320-280-35-14 NOTE Perform step 28-10 only if not installing cargo soft-top enclosure; otherwise, start with step 28-11. 28-10. Install antenna (33) and gasket (32) on antenna mount assembly (16) with four capscrews (26), eight lockwashers (27), and four nuts (28). NOTE Perform steps 28-11 and 28-12 only when installing cargo soft-top enclosure. 28-11. Install cargo soft-top enclosure (34). (Refer to TM 9-2320-280-10.) NOTE Ensure all slack has been taken out of cargo soft-top enclosure, and that cargo soft-top enclosure has been properly installed. 28-12. Using antenna (33) as template, locate, mark, and drill four 0.375-in. holes (35) and cut “X” (36) in cargo soft-top enclosure (34). 28-13. Install antenna (33) and gasket (32) on antenna mount assembly (16) and cargo soft-top enclosure (34) with four capscrews (26), eight lockwashers (27), and four nuts (28), ensuring that ground strap (29) is inserted through cut hole (36). 28-14. Install ground strap (29) on antenna mount assembly (16) with screw (31), three lockwashers (30), and nut (21). 28-15. Tighten nuts (21) and (28). 30 31 16 32 33 26 27 28 27 29 21 Figure 5-102. 30 21. NUT – 9419143 – QTY. 1 26. CAPSCREW – B1821BH038C150N – QTY. 4 27. LOCKWASHER – MS45904-76 – QTY. 8 28. NUT – 13218E0320-293 – QTY. 4 29. GROUND STRAP • BRAIDED WIRE – AA59569F30T0375 – QTY. A/R • TERMINAL LUG – MS20659-141 – QTY. 2 30. LOCKWASHER – MS45904-68 – QTY. 3 31. CAPSCREW – B1821BH025C075N – QTY. 1 32. GASKET – A3013655-1 – QTY. 1 33. ANTENNA – A3005031 – QTY. 1 26 27 32 33 36 29 28 27 34 35 ~