TB-9-2320-280-35-14 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 150W Radio Download
Page 103 of 148
5-81 TB 9-2320-280-35-14 Figure 5-100. 6 9 13 10 9.75 EPLRS MOUNTING PLATE 11 12 ~ NOTE • Remove left rear side rail, if necessary. (Refer to TM 9-2320-280-20.) • Front edge of upper antenna plate should be approximately 9.75 in. from edge of front bolts in wheelhouse. 28-3. Locate screw (9) on left rear wheelhouse (13), and drill out rivet (10) from left rear wheelhouse (13). Enlarge hole to 0.281 in. 28-4. Position support plate (8) underneath wheelhouse (13) and drill two 0.281-in. diameter holes (11). 28-5. Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (7) and three 0.408-in. holes (12) in left rear wheelhouse (13). 6. ANTENNA PLATE – A3104004-1 – QTY. 1 8 7 7 7 7 ~