TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 99 of 148
5-71 TB 9-2320-280-35-13 NOTE Perform step 23-4 for vehicles with left rear cab enclosure panel only. 23-4. Cut 2x2 in. section (13) from left rear cab enclosure panel (11). Install grommet (12). Reinstall cab enclosure panel (11). (Refer to TM 9-2320-280-20.) 23-5. Locate, mark, and drill three 0.147-in. holes (8) along tunnel edge (9). 23-6. Route INC-EPUU cable (1) and power cable (4) rearward under left-side B-beam (10) and along tunnel edge (9). 23-7. Route INC-EPUU cable (1) and power cable (4) rearward along tunnel edge (9) and secure with three clamps (7) and self-tapping screws (6). 11 13 2.00 1 4 10 5.50 B-PILLAR 2.00 2.00 12 6 7 6 7 8 6 7 8 9 8 ~ ~ 11.00 11.00 8.00 Figure 5-91. 6. SELF-TAPPING SCREW – 9421073 – QTY. 5 7. LOOP CLAMP – MS21333-75 – QTY. 2 12. GROMMET – MS21266-1N – QTY. A/R