TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 96 of 148
5-68 TB 9-2320-280-35-13 3. CAPSCREW – B1821BH025C075N – QTY. 1 5. GROMMET – MS21266-4N – QTY. A/R 6. CLAMP, LOOP – MS21333-98 – QTY. 1 7. LOCKWASHER – MS35338-44 – QTY. 1 8. NUT, HEXAGON – 9419143 – QTY. 1 11. CABLE, SINGARS ANTENNA – A3014031-8 – QTY. 1 Figure 5-88. ~ 2 3 4 5 6 7 8 9 10 11 1 1 10 12 13 14 15 16 16 17 18 1.75 2.00 Section XXII. FRONT SINCGARS CABLES INSTALLATION (TWO-MAN VEHICLES) NOTE Perform following procedures for two-man vehicle configuration only. 22-1. Locate, mark, and drill one 0.281-in. hole (9) in side of antenna base bracket (10). 22-2. Route SINCGARS antenna cable (11) through hole (4) in overcab mount (2) and antenna base bracket (10) and connect antenna cable (11) to antenna (1). 22-3. Install grommet (5) in antenna base bracket (10) and overcab mount (2). 22-4. Secure antenna cable (11) to antenna base bracket (10) with loop clamp (6), capscrew (3), lockwasher (7), and nut (8). 22-5. Connect antenna ground strap (12) to antenna (1) with screw (14) and lockwasher (13). 22-6. Connect antenna ground strap (12) to antenna base bracket (10) with screw (15), two lockwashers (16), lockwasher (17), and nut (18).