TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 95 of 148
5-67 TB 9-2320-280-35-13 21-24. Position grommet (52) in access hole (49). 21-25. Route all cables (12), (15), and (29) under fixed rear door (48) and along rear perimeter of left rear seat back support (51), and secure with three loop clamps (26), screws (55), lockwashers (53), and plain-assembled nuts (54). 21-26. Route all cables (12), (15), and (29) through access hole (49) and grommet (52). 21-27. Secure all cables (12), (15), and (29) to left rear wheelhouse (46) with four clamps (26) and self-tapping screws (25). 21-28. Take all slack out of all cables and store under EPLRS mount assembly (45). 21-29. Tighten all screws and nuts on all clamps. 21-30. Secure right-side tunnel insulation. (Refer to TM 9-2320-280-20.) Figure 5-87. 25. SELF-TAPPING SCREW – 9421073 – QTY. 4 26. LOOP CLAMP – MS21333-77 – QTY. 7 52. GROMMET – MS35489-24 – QTY. 1 53. LOCKWASHER – MS35338-43 – QTY. 3 54. NUT, PLAIN-ASSEMBLED – 9422771 – QTY. 3 55. SCREW – MS35206-265 – QTY. 3 12 15 29 18 46 45 ~ 49 52 48 ~ 51 26 53 54 26 26 53 54 53 54 ~ 55 25 25 26 26