TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 92 of 148
5-64 TB 9-2320-280-35-13 30 32 2.00 24 12 15 18 5.50 B-PILLAR 2.00 2.00 31 23 ~ 25 26 25 26 23 25 26 23 25 28 29 25 28 27 23 ~ 11.00 11.00 8.00 Figure 5-84. 25. SELF-TAPPING SCREW – 9421073 – QTY. 5 26. LOOP CLAMP – MS21333-77 – QTY. 3 28. LOOP CLAMP – MS21333-72 – QTY. 2 31. GROMMET – MS21266-1N – QTY. A/R NOTE Perform step 21-10 for vehicles with left rear cab enclosure panel only. 21-10. Cut 2x2 in. section (32) from left rear cab enclosure panel (30). Install grommet (31). Reinstall cab enclosure panel (30). (Refer to TM 9-2320-280-20.) 21-11. Locate, mark, and drill five 0.147-in. holes (23) along tunnel edge (27) and rear of left B-beam (24). 21-12. Route INC-EPUU cable (12), URO extension cable (18), and power cable (15) rearward under B-beam (24) and along tunnel edge (27). 21-13. Route antenna cable (29) along rear of left B-beam (24) and secure with two loop clamps (28) and self-tapping screws (25). 21-14. Route INC-EPUU cable (12), URO extension cable (18), power cable (15), and antenna cable (29) rearward along tunnel edge (27) and secure with three clamps (26) and self-tapping screws (25).