TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 77 of 148
5-49 TB 9-2320-280-35-13 Figure 5-66. 17-19. Locate, mark, and drill one 0.147-in. hole (35) in top of windshield frame (30). 17-20. Route PLGR antenna cable (9) on top of windshield frame (30) and secure with loop clamp (26) and self-tapping screw (25). 17-21. Route PLGR antenna cable (9) down through center access hole (29) of integrated rack (31), and coil excess antenna cable (9) under integrated rack (31). 17-22. Route PLGR power cable (33) from bracket (32) to right-side tunnel insulation (34). NOTE Loosen right-side tunnel insulation before performing step 17-23. (Refer to TM 9-2320-280-20.) 17-23. Route PLGR power cable (33) under edge of right-side tunnel insulation (34) to 24V terminal bar at cab enclosure panel. 25. SELF-TAPPING SCREW – 9421073 – QTY. 1 26. LOOP CLAMP – MS21333-65 – QTY. 1 31. PLGR POWER CABLE – 9728558-10 – QTY. 1 25 35 26 9 30 31 32 33 34 29 ~ ~