TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 75 of 148
5-47 TB 9-2320-280-35-13 17-10. Split one side of grommet (10) and place on PLGR antenna cable (9). 17-11. Insert PLGR antenna cable (9) and grommet (10) in hole (4) in inner right windshield frame (5). NOTE If sun visor kit has not been installed, perform steps 17-12 through 17-14. If sun visor has been installed, perform steps 17-15 and 17-16. 17-12. Locate, mark, and drill one 0.390-in. diameter hole (21) in windshield frame (5). 17-13. Install insert (22) in hole (21). 17-14. Route PLGR antenna cable (9) along inner right windshield frame (5) with loop clamp (20), lockwasher (19), and capscrew (18). 17-15. Remove capscrew (18) and lockwasher (19). 17-16. Route PLGR antenna cable (9) along inner right windshield frame (5) with loop clamp (20), lockwasher (19), and capscrew (18). Figure 5-64 . 18 19 20 9 10 5 4 21 22 ~ C L 2.38 10. GROMMET – MS35489-143 – QTY. 1 18. CAPSCREW – B1821BH025C100N – QTY. 1 19. LOCKWASHER – 120380 – QTY. 1 20. LOOP CLAMP – MS21333-96 – QTY. 1 22. INSERT – 12446871-2 – QTY. 1