TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 67 of 148
5-39 TB 9-2320-280-35-13 Figure 5-55. 1 2 7 6 3 1 6 4 8 9 1. LOUDSPEAKER CABLE – A3014038-3 – QTY. 1 6. ANTENNA CABLE – A3014031-8 – QTY. 1 12. LOOP CLAMP – MS21333-121 – QTY. 1 ~ ~ ~ ~ 9 14 13 1 3 10 11 12 NOTE SINCGARS model AN/VRC-92F shown. 15-2. Route loudspeaker cable (1) down through center access hole (2), under integrated rack (3), and under left-side tunnel insulation (9) towards left speaker (8). Connect loudspeaker cable (1) to left speaker (8). 15-3. Secure loudspeaker cable (1) to integrated rack (3) with loop clamp (12) and existing screw (14), washer (13), lockwasher (11), and nut (10). Do not tighten nut at this time. Coil excess loudspeaker cable (1) and store under integrated rack (3). 15-4. Route antenna cable (6) from left side of mounting base (7), down through center access hole (2), under integrated rack (3), and under right-side tunnel insulation (4) to B-beam. ~ Change 1