TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 66 of 148
5-38 TB 9-2320-280-35-13 Figure 5-54. Section XV. CABLES INSTALLATION NOTE • This procedure applies to vehicles without existing antennas. For vehicles with existing antennas, remove all control cables. (Refer to TM 9-2320-280-20.) • Loosen left- and right-side tunnel insulation before performing steps 15-1, 15-3, 15-4, and 15-8. (Refer to TM 9-2320-280-20.) • SINCGARS model AN/VRC-92F shown. 15-1. Route loudspeaker cable (1) down through center access hole (2), under integrated rack (3), and under right-side tunnel insulation (4) towards right speaker (5). Connect loudspeaker cable (1) to right speaker (5). Coil excess loudspeaker cable (1) and store under integrated rack (3). 1 5 3 4 2 1 ~ 1. LOUDSPEAKER CABLE — A3014038-3 — QTY. 1 Change 1