TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 60 of 148
5-32 TB 9-2320-280-35-13 Figure 5-49. Figure 5-48. 13-10. Attach ground strap (17) to antenna base (16) and position antenna base (16) on antenna mounting bracket (5). 13-11. Install terminal lug (18) on ground strap (17). 13-12. Remove bottom capscrew (6) and lockwashers (2) from antenna mounting bracket (5). Secure antenna ground strap (17) to right rear wheelhouse (3) and antenna mounting bracket (5) with existing capscrew (6), three lockwashers (2), and nut (1). 13-13. Secure antenna base (16) to antenna mounting bracket (5) with four capscrews (14) and lockwashers (15). NOTE Ensure antenna adapter tilts fore and aft of vehicle after tightening. 13-14. Install antenna adapter (19) on antenna base by screwing on until tight. 13-15. Secure with existing clamp (20). 1 2 15 3 14 5 16 17 6 ~ 2 18 2 19 20 16 2. LOCKWASHER – MS45904-72 – QTY. 1 14. CAPSCREW – B1821BH038F175N – QTY. 4 15. LOCKWASHER – MS45904-76 – QTY. 4 16. ANTENNA – 4245 – QTY. 1 18. TERMINAL LUG – MS20659-108 – QTY. 1 19. ANTENNA ADAPTER – RF-1980-AT001 – QTY. 1