TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 37 of 148
5-13 TB 9-2320-280-35-13 7-6. Remove paint from vicinity of three mounting slots (7) on integrated rack (1). 7-7. Apply anti-seize compound to vicinity of three mounting slots (7) on integrated rack (1) as required. Figure 5-18. 1 7 7 NOTE Do not install mounting hardware on top of integrated rack at this time. Not installing this hardware leaves the integrated rack free to pivot to assist in routing of cabling. Secure rack only after all cabling has been routed. 7-8. Mount integrated rack (1) to existing radio rack mount (10) using screw (12), washer (11), lockwasher (9), and nut (8). Repeat for opposite side. Do not tighten screws. Figure 5-19. 8 9 10 12 11 8. NUT – MS35649-2382 – QTY. 2 9. LOCKWASHER – MS35338-46 – QTY. 2 11. WASHER – 2436163 – QTY. 2 12. CAPSCREW – B1821BH038C225N – QTY. 2 ~ 1