TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 111 of 148
5-83 TB 9-2320-280-35-13 NOTE Perform step 25-10 only if not installing cargo soft-top enclosure; otherwise, start with step 25-11. 25-10. Install antenna (31) on antenna mount assembly (14) with four capscrews (24), gasket (30), eight lockwashers (25), and four nuts (26). NOTE Perform steps 25-11 through 25-12 only when installing cargo soft- top enclosure. 25-11. Install cargo soft-top enclosure (32). (Refer to TM 9-2320-280-10.) NOTE Ensure all slack has been taken out of cargo soft-top enclosure, and that cargo soft-top enclosure has been properly installed. 25-12. Using antenna (31) as template, locate, mark, and drill four 0.375-in. holes (33) and cut “X” (34) in cargo soft-top enclosure (32). 25-13. Install antenna (31) on antenna mount assembly (14) and cargo soft-top enclosure (32) with four capscrews (24), gasket (30), eight lockwashers (25), and four nuts (26), ensuring that ground strap (27) is inserted through cut hole (34). 25-14. Install ground strap (27) on antenna mount assembly (14) with screw (29), three lockwashers (28), and nut (19). 25-15. Tighten all nuts (19) and (26). 28 29 14 30 31 24 25 26 25 27 19 Figure 5-101. 28 19. NUT – 9419143 – QTY. 1 24. CAPSCREW – B1821BH038C150N – QTY. 4 25. LOCKWASHER – MS45904-76 – QTY. 8 26. NUT – 13218E0320-293 – QTY. 4 27. GROUND STRAP • BRAIDED WIRE – AA59569F30T0375 – QTY. A/R • TERMINAL LUG – MS20659-141 – QTY. 2 28. LOCKWASHER – MS45904-68 – QTY. 3 29. CAPSCREW – B1821BH025C075N – QTY. 1 30. GASKET – A3013655-1 – QTY. 1 31. ANTENNA – A3005031 – QTY. 1 24 25 30 31 34 27 26 25 32 33 ~