TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 103 of 148
5-75 TB 9-2320-280-35-13 Figure 5-94. 6 NOTE • Remove right rear side rail, if necessary. (Refer to TM 9-2320-280-20.) • Rear edge of upper mounting plate should be approximately 1.187 in. from front edge of EPLRS mounting plate. 24-3. Locate screw (10) on right rear wheelhouse (7) and drill out rivet (9) from right rear wheelwell (7). Enlarge hole to 0.281 in. 24-4. Position support plate underneath wheelhouse (7) and drill two 0.281-in. diameter holes. 24-5. Using upper antenna plate (6) as template, locate, mark, and drill thirteen 0.281-in. holes (8) and three 0.408-in. holes (11) in left rear wheelhouse (7). 6. ANTENNA PLATE – A3104004-1 – QTY. 1 11 7 10 9 8 ~ 9.75