TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 102 of 148
5-74 TB 9-2320-280-35-13 1. SCREW – B1821BH025C100N – QTY. 8 2. LOCKWASHER – MS35338-44 – QTY. 16 3. ANTENNA MOUNTING BRACKET – A3018371-2 – QTY. 1 4. ANTENNA BASE REINFORCEMENT BRACKET – A3018372-2 – QTY. 1 5. NUT – MS51967-2 – QTY. 8 4 1 5 3 2 2 Figure 5-93. ~ Section XXIV. RIGHT-SIDE SINCGARS PEDESTAL ANTENNA INSTALLATION (FOUR-MAN VEHICLES) NOTE Perform following procedures for four-man vehicle configuration only. 24-1. Assemble antenna mounting bracket (3) and antenna base reinforcement bracket (4) with eight screws (1), sixteen lockwashers (2), and eight nuts (5). Do not tighten nuts (5) at this time. NOTE Remove paint or tape from mounting holes. 24-2. Remove paint from vicinity of all mounting holes on both antenna plates, antenna mount assembly, and ground strap. Apply anti-seize compound as required.