TB-9-2320-280-35-13 HMMWV Technical Bulletin Installation for SINCGARS FBCB2 PLGR EPLRS 20W Radio Download
Page 100 of 148
5-72 TB 9-2320-280-35-13 23-8. Locate, mark, and drill one 0.225-in. hole (22) in inboard corner on rear inside lip of left rear seat back support (19). 23-9. Locate, mark, and drill two 0.147-in. holes (24) in front face of left rear wheelhouse (17). 23-10. Route cables (16), (1), and (4) along rear perimeter of left rear seat back support (19), up front face of left rear wheelhouse (17), and under antenna base (30). 23-11. Secure cables (16), (1), and (4) to left rear wheelhouse (17) with screw (23), lockwasher (21), nut (20), two self-tapping screws (18), two existing screws (14), and five loop clamps (15). 23-12. Route cables (1) and (4) to EPLRS mount (32) 23-13. Secure antenna cable (16) to antenna base (30) with existing loop clamps (29), screws (25), washers (26), lockwashers (27), and nuts (28). 23-14. Connect antenna cable (16) to antenna (31). 23-15. Take all slack out of cable and store under EPLRS mount assembly. 23-16. Tighten all screws and nuts on all clamps. 23-17. Secure right-side tunnel insulation. (Refer to TM 9-2320-280-20.)