TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 90 of 162
TB 9-2320-280-35-12 5-62 Figure 5-89. 12. LOOP CLAMP – MS21333-69 – QTY. 3 13. SELF-TAPPING SCREW – 9421073 – QTY. 2 15. NUT – MS35650-302 – QTY. 1 17. SCREW – MS35224-65 – QTY. 1 24. TIE STRAP – MS3367-1-0 – QTY. A/R 29. SCREW – MS90725-30 – QTY. 4 30. WASHER – MS27183-12 – QTY. 4 27 6 28 29 31 32 35 34 33 14 15 16 17 12 18 19 20 21 22 23 24 18 25 18 25 26 1 30 13 31-8. Route two antenna cables (1) and (6) along front wheelwell seam (16) and along front (14), intermediate (35), and rear (33) cargo bed supports. Secure with two self-tapping screws (13), loop clamps (12), screw (17), loop clamp (12), nut (15), and existing self-tapping screw (18) and loop clamp (33). 31-9. Route antenna cable (1) along existing taillight wiring harness (44) with two existing loop clamps (27) and (26), self-tapping screws (18), and lockwashers (25). 31-10. Route antenna cable (1) to antenna base (32) with existing loop clamp (19), nut (23), lockwasher (22), washer (21), and screw (20). 31-11. Attach antenna cable (1) to antenna base (32). 31-12. Coil excess antenna cable (1) and secure to inside of taillight closeout cover with tiedown strap (24). 31-13. Attach cover plate (31) to offset antenna mount (28) with four screws (29) and four washers (30). 12