TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 88 of 162
TB 9-2320-280-35-12 5-60 Section XXXI. SINCGARS ANTENNA CABLE INSTALLATION NOTE Loosen left- and right-side tunnel insulation. (Refer to TM 9-2320-280-20.) 31-1. Route antenna cable (1) and power cable (2) from left side of mounting base (11), down through center access hole (4), under integrated rack (5), and under right-side tunnel insulation (7) towards rear of vehicle. 31-2. Route antenna cable (10) from mounting base (11) to MT-6353/VRC mounting base (9). 31-3. Route power amp cable (3) from MT-6353/VRC mounting base (9) up through center access hole (4) and connect power amp cable (3) to W1J1 cable (3.1). 31-4. Route control cable (8) from MT-6353/VRC mounting base (9) up through center access hole (4) to mounting base (11). 31-5. Route antenna cable (6) from front of MT-6353/VRC mounting base (9), under integrated rack (5), and under right-side tunnel insulation (7) towards rear of vehicle. 1 8 11 4 10 6 9 3 2 5 1 2 7 6 ~ ~ ~ ~ 1. ANTENNA CABLE – A3014031-8 – QTY. 1 2. SINCGARS POWER CABLE – A3014039-2 – QTY. 1 6. ANTENNA CABLE – A3014031-17 – QTY. 1 10. ANTENNA CABLE – A3014032-3 – QTY. 1 Figure 5-87. Change 1 3.1