TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 85 of 162
TB 9-2320-280-35-12 5-57 Figure 5-83. ~ 30-2. Using QEAM rack (4) as template, locate, mark, and drill four 0.344-in. diameter holes (9) in roof of vehicle (14). 30-3. Mark location for four QEAM spacers (8) and apply RTV sealant to marked areas (10). NOTE Allow RTV to cure for 30 minutes. 30-4. Press four spacers (8) onto roof of vehicle (14). 30-5. Position QEAM rack (4) over holes in four spacers (8). 30-6. Apply RTV to four bolt holes (9) and insert four bolts (6) and washers (7) into QEAM carrier. 30-7. Apply RTV to one side of four washers (11). Press washers (11) in place. 30-8. Install lockwasher (12) and nut (13). 6 7 4 8 9 10 11 12 13 14 6. SCREW – B1821BH031C300N – QTY. 4 7. WASHER – 120393 – QTY. 4 8. QEAM SPACER (PART OF A3265715) – QTY. 4 11. WASHER – 120393 – QTY. 4 12. LOCKWASHER – MS45904-72 – QTY. 4 13. NUT – MS51967-6 – QTY. 4 ~