TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 81 of 162
TB 9-2320-280-35-12 5-53 28-10. Install upper half of antenna offset mount (18) to antenna support (1) with four screws (23), eight washers (3), four lockwashers (5), and four nuts (6). NOTE Ensure holes in antenna base are aligned with weldnut holes in mounting bracket. 28-11. Install antenna (24) and gasket (17) on antenna offset mount (18) and secure with four screws (14), lockwashers (15), and washers (16). NOTE Prior to securing antenna ground lead, enlarge hole on offset mount with 9/32-in. drill bit to allow 1/4-in. screw to fit. 28-12. Secure antenna ground lead (20) to antenna offset mount (18) with screw (22), two lockwashers (21), and nut (19). 14 15 16 18 17 19 20 21 21 1 22 6 5 3 3 23 24 ~ 3. WASHER – MS15795-814 – QTY. 8 5. LOCKWASHER – MS35338-141 – QTY. 4 6. NUT – MS35690-610 – QTY. 4 14. CAPSCREW – MS35307-365 – QTY. 4 15. LOCKWASHER – MS45904-72 – QTY. 4 16. WASHER – 2436163 – QTY. 8 17. GASKET – A3013655-1 – QTY. 1 18. OFFSET MOUNT – A3046219 – QTY. 1 19. NUT – MS35650-302 – QTY. 1 21. LOCKWASHER – MS45904-68 – QTY. 2 22. SCREW – MS35207-263 – QTY. 1 23. SCREW – MS90725-62 – QTY. 4 24. ANTENNA – A3017899-2 – QTY. 1 Figure 5-78.