TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 80 of 162
TB 9-2320-280-35-12 5-52 28-3. Install 4.250-in. piece of plastic-edge grommet (9) in existing hole (8) of right-side rear wheelhouse (7). 28-4. Temporarily secure antenna support (1) and angle plate (2) to right-side rear wheelhouse (7) with three screws (4) and three nuts (6). 28-5. Using antenna support (1) as template, locate, mark, and drill two 0.406-in. diameter holes (10) in right-side rear wheelhouse (7). 28-6. Remove antenna support (1) and angle plate (2) from right-side rear wheelhouse (7). 28-7. Install 4.250-in. piece of plastic-edge grommet (9) in hole (11) of antenna support (1). 28-8. Secure angle plate (2) and antenna support (1) to right-side rear wheelhouse (7) with backing plate (13), three screws (4), six washers (3), three lockwashers (5), and three nuts (6). 28-9. Secure antenna support (1) to right-side rear wheelhouse (7) with plate (12), two screws (4), four washers (3), two lockwashers (5), and two nuts (6). 4. SCREW – MS90725-64 – QTY. 3 6. NUT – MS35690-610 – QTY. 3 3. WASHER – MS15795-814 – QTY. 10 4. SCREW – MS90725-64 – QTY. 2 5. LOCKWASHER – MS35338-141 – QTY. 5 6. NUT – MS35690-610 – QTY. 2 12. PLATE – A3103784 – QTY. 1 13. BACKING PLATE – A3046222 – QTY. 1 Figure 5-75. Figure 5-74. 7 1 8 9 2 4 6 10 Figure 5-76. 1 11 9 Figure 5-77. 5 2 13 3 3 5 6 3 4 4 1 12 3 7 6 ~ ~ 9. GROMMET – MS21266-4N – QTY. A/R 9. GROMMET – MS21266-4N – QTY. A/R