TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 77 of 162
TB 9-2320-280-35-12 5-49 Figure 5-70. 27-10. Install upper half of antenna offset mount (15) on lower half of antenna mount (2) with four screws (16), eight washers (5), four lockwashers (4), and four nuts (3). NOTE Ensure holes in antenna base and grommet are aligned with weldnut holes in mounting bracket. 27-11. Install antenna (22) and gasket (21) on top of antenna offset mount (15) with four screws (14), lockwashers (24), and washers (23). NOTE Prior to securing antenna ground lead, enlarge hole on offset mount with 9/32-in. drill bit to allow 1/4-in. screw to fit. 27-12. Secure antenna ground lead (19) to lower half of antenna mount (2) with screw (17), two lockwashers (18), and nut (20). 15 22 14 17 18 18 19 20 21 23 24 5 5 4 3 2 16 ~ 3. NUT – MS35690-610 – QTY. 4 4. LOCKWASHER – MS35338-141 – QTY. 4 5. WASHER – MS15795-814 – QTY. 8 14. CAPSCREW – MS35307-365 – QTY. 4 15. OFFSET MOUNT – A3046219 – QTY. 1 16. SCREW – MS90725-62 – QTY. 4 17. SCREW – MS35207-263 – QTY. 1 18. LOCKWASHER – MS45904-68 – QTY. 2 20. NUT – MS35650-302 – QTY. 1 21. GASKET – A3013655-1 – QTY. 1 22. ANTENNA – A3017889-2 – QTY. 1 23. WASHER – 2436163 – QTY. 4 24. LOCKWASHER – MS45904-72 – QTY. 4