TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 33 of 162
TB 9-2320-280-35-12 5-9 Section IV. SINCGARS MOUNTING TRAY AND AMP GUARD INSTALLATION 4-1. Remove paint from vicinity of four mounting holes (6) on integrated rack (7) and vicinity of four mounting holes (5) on bottom of mounting base (4). 4-2. Apply anti-seize compound to vicinity of four mounting holes (6) on integrated rack (7) and four mounting holes (5) on bottom of mounting base (4) as required. NOTE Two lockwashers and one nut are used on driver-side screws only. 4-3. Install mounting base (4) and amp guard (9) on integrated rack (7) with two capscrews (2), two capscrews (3), six lockwashers (1), and two nuts (8). 4-4. Place warning decal (10) on amp guard (9). Figure 5-12. 1. LOCKWASHER – MS45904-72 – QTY. 6 2. CAPSCREW – B1821BH031F125N – QTY. 2 3. CAPSCREW – B1821BH031F100N – QTY. 2 4. MOUNTING BASE, MT-6352/VRC – A3013367-1 – QTY. 1 8. NUT – MS51968-5 – QTY. 2 9. AMP GUARD – 872842-1 – QTY. 1 10. DECAL – 861868-2 – QTY. 1 6 5 1 9 10 2 1 3 4 7 1 8 9 5 5 5 6