TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 29 of 162
TB 9-2320-280-35-12 5-5 Figure 5-6. 2-12. Using terminal strips (16) and (13) as templates locate, mark, and drill eight 0.201-in. diameter holes (20) in battery box (2) rear wall. 2-13. Secure one 8-position terminal strip (13) and one 6-position terminal strip (16) to battery box (2) rear wall with eight bolts (14), washers (15), lockwashers (17), and nuts (18). 2-14. Using shunt assembly (19) as template, locate, mark, and drill two .201-in. diameter holes (21) in battery box (2) rear wall. 2-15. Secure shunt assembly (19) to battery box (2) rear wall with two bolts (14), two washers (15), two lockwashers (17), and two nuts (18). 14 14 13 2 15 15 20 21 19 18 17 16 17 18 1.66 1.125 2.25 1.00 4.25 1.66 ~ 13. TERMINAL STRIP (8-POLE) – 7527K28 – QTY. 1 14. SCREW – MS35207-267 – QTY. 10 15. WASHER – MS27183-8 – QTY. 10 16. TERMINAL STRIP (6-POLE) – 7527K26 – QTY. 1 17. LOCKWASHER – MS45904-60 – QTY. 10 18. NUT – MS35650-302 – QTY. 10 19. SHUNT ASSEMBLY – PKMM-000-013 – QTY. 1