TB-9-2320-280-35-12 HMMWV Technical Bulletin Installation for EPLRS Network Manager Download
Page 122 of 162
TB 9-2320-280-35-12 5-94 Section XLVI. PASSENGER-SIDE MULTI-NET RACK CABLE INSTALLATION 46-1. Locate, mark, and drill two 0.281-in. diameter holes (12) in multi-net rack (3). 46-2. Locate, mark, and drill two 0.281-in. diameter holes (13) in multi-net rack (3). 46-3. Connect battery alarm box power cable (10) to battery alarm box (9). 46-4. Route battery alarm box power cable (10) along multi-net rack (3) lower shelf to curbside footwell. 46-5. Secure battery alarm box power cable (10) with two clamps (11), screws (5), lockwashers (4), and nuts (8). 46-6. Route EPLRS antenna cable (1) and INC-EPUU cable (2) along underside of multi-net rack (3) upper shelf. 46-7. Secure EPLRS antenna cable (1) and INC-EPUU cable (2) to multi-net rack (3) with five clamps (7), screws (5), lockwashers (4), and nuts (8). 1 7 2 3 4 5 6 7 8 9 10 11 12 8 8 4 5 4 5 1.125 2.5 7.5 13 4. LOCKWASHER – MS45904-68 – QTY. 7 5. SCREW – MS90725-6 – QTY. 7 7. LOOP CLAMP – 3225T48 – QTY. 5 8. NUT – MS51967-2 – QTY. 7 10. BATTERY ALARM BOX CABLE – A3265596 – QTY. 1 11. LOOP CLAMP – MS21333-102 – QTY. 2 Figure 5-133. ~