MWO-9-2330-390-35-1 HMMWV M1022A1 Dolly Set Positioning Tube Reinforcement Download
Page 9 of 48
MWO 9-2330-390-35-1 9 12. WEIGHT AND BALANCE DATA. a. Additional weight (452.2 lbs). ITEM NOMENCLATURE PART NO. WEIGHT (lbs) QTY. 19 Mount - Lower Front 001025-1-008 8.18 2 20 Mount - Lower Rear (L) 001025-1-013(L) 7.70 1 21 Mount - Lower Rear (R) 001025-1-013(R) 7.70 1 22 Bolt – 7 x ½ UNC, Hex 91257A738 0.52 4 23 Bushing – Steel, Shoulder 001025-1-016 0.25 8 24 Nut – ½ UNC, Locking 92501A437 0.03 4 25 Shim – Cylinder 001025-1-007 1.24 4 26 Bolt – ¼ UNC, Flat Head 91253A536 0.02 12 27 Assembly-Cable Lanyard 001025-1-907 1.50 4 28 Mount - Upper 001025-1-003 8.29 4 29 Pin – 1 x 7, Clevis 11-339-01 1.70 4 30 Pin – Cotter, Hairpin 98335A094 0.05 4 31 Spacer – 1.0 in. ID 92510A371 0.14 4 32 Mount - Stability Cable 001025-1-009 1.06 4 33 Tube – Lower Vertical 001025-1-103 40.12 4 34 Tube – Upper Vertical (L) 001025-1-104(L) 49.65 2 35 Tube – Upper Vertical (R) 001025-1-104(R) 49.65 2 b. Weight Removed (320.9 lbs). ITEM NOMENCLATURE PART NO. WEIGHT (lbs) QTY. - Lower Vertical Tube 36.47 4 - Upper Vertical Tube 42.00 4 13 Pin – Straight, Headed 8D00060-2 1.07 4 14 Washer – Flat, 1 in. AN960-1616 0.40 4 15 Pin - Cotter MS24665-495 0.01 4 16 Pin - Cotter MS24665-351 0.01 4 17 Washer – Flat, ½ in. MS51412-8 0.03 4 18 Pin – Straight, Headed 8D00060-3 0.23 4 c. Net Weight Increase (131.3 lbs). 13. QUALITY ASSURANCE REQUIREMENTS. a. General. The following information is furnished to ensure the proper application of this MWO and provide clarification in regard to the adequacy of installer’s inspection methods and procedures applicable to Quality Assurance (QA). Inspection shall be IAW TM 9-2330-390-14&P, and MWO.