Covering the politics, Business and technology of defense - Subscribe Today

MWO-9-2330-390-25-1 HMMWV M1022A1 Dolly Set Positioning Tube Reinforcement Download

Page 39 of 54

MWO 9-2330-390-25-1 C-7 APPENDIX C: TOP AND BOTTOM BEAM AND HYDRAULIC LIFT CYLINDER REMOVAL / INSTALLATION (Con’t). 12. Slide one of the upper vertical tubes (34 or 35) over an assembled lower vertical tube Proper assembly will have the stability cable mount positioned outboard and to the container mounting surface. NOTE • Ensure that the hole at rod end of positioning cylinder is aligned with hole in top beam. • To ensure proper assembly install items (29), (30), (31) as illustrated above. 13. Insert clevis pin (29) into upper vertical tube (34 or 35), tube mounting tabs on the upper beam (21 – Rear, 28 - Front), and the positioning cylinder rod end (2). 14. Add spacer (31) to free end of clevis pin (29). 15. Insert cotter pin (30) to complete upper tube connection. 16. Repeat steps 12 though 15 to complete second upper tube connection.