MWO-9-2320-387-20-1 HMMWV Rear Differential Cooler Download
Page 4 of 44
MWO 9-2320-387-20-1 4 c. Bulk and Expendable Material: NSN NOMENCLATURE CAGEC PART NO. QTY 6850-00-110-4498 Drycleaning Solvent 81348 P-D-680 A/R 6850-01-159-4844 Silicone Compound 11862 1052734 A/R 8030-01-054-0740 Sealing Compound, Pipe 05972 59231 A/R 8040-01-167-2613 Adhesive: Type II, Class I 58536 A-A-3097 TY2 CL 1 A/R 9150-01-035-5392 Lubricating Oil 81349 MIL-L-2105 A/R 9150-01-353-4799 Hydraulic Fluid 24617 Dexron® III A/R d. Parts Disposition. All parts removed and not used during installation will be returned to stock for disposition in accordance with AR 725-50. 9. SPECIAL TOOLS; TOOL KITS; JIGS; TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE); AND FIXTURES REQUIRED. a. Hand tools necessary to apply MWO are contained in this tool kit: NOMENCLATURE NSN CAGEC SUPPLY CATALOG Tool Kit, General Mechanic’s 5180-00-177-7033 50980 SC 5180-95-N26 b. Tools necessary to apply MWO is in this shop set: NOMENCLATURE NSN CAGEC SUPPLY CATALOG Shop Equipment, Automotive 4190-00-754-0654 19204 SC 4910-95-A74 Maintenance and Repair: Organizational Maintenance Common #1 10. MODIFICATION PROCEDURES. a. Vehicle Preparation. (1) Park vehicle and apply parking brake lever. (Refer to TM 9-2320-387-10.) (2) Disconnect battery ground cables. (Refer to TM 9-2320-387-24.) (3) Remove rear brake protection guards. (Refer to TM 9-2320-387-24.) (4) Remove rear propeller shaft. (Refer to TM 9-2320-387-24.) NOTE NOTE Have drainage container ready to catch oil. (5) Remove drain plug and drain rear differential oil. (Refer to TM 9-2320-387-24.) . WARNING WARNING. Hood must be supported during hood prop and bracket removal. Failure to support hood may cause injury to personnel or damage to equipment.