MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 91 of 188
STP 9-94P1-SM-TG 091-94P-1079 Replace the Hoist Assembly DANGER Follow all Danger warning in TMs WARNING Follow all warning in TMs CAUTION Comply with all unit/shop SOPs Conditions: Perform this task in a operational environment given an armored vehicle- mounted M270/A1 rocket launcher; a faulty Hoist Assembly; DA Form 2404, Equipment Inspection and Maintenance Worksheet; a 94P tool kit; breakout boxes; a digital multi- meter; a test cable; jury struts; TM 9-1425-648-13&P for the M270; TM 9-1055-647- 13&P for the M270A1; TM 9-243, and DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: Troubleshooting procedures on the hoist assembly were performed according to the applicable technical manuals. Perform this task without causing injury to self, other personnel, the environment, or damage to equipment. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Visually inspect the hoist assembly and corrects any defects. Check the following items below: a. Bolts, nuts, and screws. b. Bearings and bushings. c. Components. d. Electrical cables and connectors. 1 October 2014 3-61