MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 76 of 188
091-94P-1063 Replace the Hoist Hook and Pulley Assembly WARNING Follow all warning in TMs CAUTION Comply with all unit/shop SOPs Conditions: Perform this task in a operational environment given an armored vehicle- mounted M270A1 rocket launcher; a faulty hoist hook and pulley assembly; DA Form 2404, Equipment Inspection and Maintenance Worksheet; one 94P MLRS repairer; one 13M MLRS crewmember to assist as required; a 94P shop set and tool kit; TM 9-1055- 647-13&P; TM 9-243, and a DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: The hoist hook and pulley assembly was replaced according to the applicable technical manuals. Perform this task without causing injury to self, other personnel, the environment, or damage to equipment. CAUTION! Comply with unit/shop SOP requirements for disposal of scrap metal. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Perform a visual inspection of the hoist hook and pulley assembly and correct any defects. Check the following items below: a. Bolts and nuts. b. Bearings and bushings. c. Components. d. Electrical cable and connectors. 3-46 1 October 2014