MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 72 of 188
e. Hoses and fluids. 2. Remove the link assembly from the rocket pod latch-hook assembly in accordance with TM 9-1055-647-13&P. a. Set the latch handle to open (unlatched) position. b. Remove the nut and washer from the eccentric pin. c. Remove the eccentric pin. d. Remove the cotter pin from nut securing bell crank assembly. 3. Remove the faulty rocket pod latch-hook assembly. 4. Install the replacement rocket pod latch-hook assembly in accordance with TM 9- 1055-647-13&P. 5. Perform the rigging gauge adjustment procedures in accordance with TM 9-1055- 647-13&P. 6. Connect the link assembly to the rocket pod latch-hook assembly. a. Install the cotter pin to nut securing bell crank assembly. b. Install the eccentric pin. c. Install the nut and washer to the eccentric pin. d. Open the latch handle to open (unlatched) position. 7. Operate the latch handle to ensure a smooth. Perform RP latch assembly adjustment if criteria are not met. 8. Verify the rocket pod latch-hook assembly is operational. 9. Complete maintenance forms. Evaluation Preparation: Ensure all items required in the condition statement (or appropriate substitutions) are on hand and all safety requirements are met. Performance Measures GO NO-GO 1. Performed a visual inspection of the rocket pod latch-hook _____ _____ assembly and corrected any defects. 3-42 1 October 2014