MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 64 of 188
091-94P-1071 Replace the Rocket Pod Hoist Carriage Assembly DANGER Follow all Danger warning in TMs WARNING Follow all warning in TMs Conditions: Perform this task in a operational environment given an armored vehicle- mounted M270/A1 rocket launcher; a faulty Rocket Pod Hoist Carriage Assembly; DA Form 2404, Equipment Inspection and Maintenance Worksheet; two 94P MLRS repairers; one 13M MLRS crewmember to assist as required; a HEMTT wrecker and operator; or overhead crane; a 94P tool kit; a manila rope; TM 9-1055-647-13&P for the M270A1; TM 9-243, and a DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: The rocket pod hoist carriage assembly was removed according to the applicable technical manuals. Perform this task without causing injury to self, other personnel, the environment, or damage to equipment. CAUTION! Use only a few drops of lubricating oil to loosen screws, nuts, and bolts. Use rags to contain any excess oil or grease. Handle disposal of hazardous materials and hazardous waste (such as, ethylene glycol, brake fluid, oil, grease, solvents, and contaminated rags) in accordance with unit Standing Operating Procedures (SOP)/Operations Orders (OPORDs), local regulations, and/or host nation laws. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Visual inspects the rocket pod hoist carriage assembly and corrects any defects. Check the following items below: a. Bolts and nuts. 3-34 1 October 2014