MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 53 of 188
STP 9-94P1-SM-TG d. Electrical cables and connectors. e. Hoses and fluid lines. 2. Install both jury struts. Note: If the jury struts cannot be installed, support the cage with the wrecker and the hoisting sling. 3. Remove elevation drive propeller shaft. 4. Remove the splined yoke. 5. Remove faulty elevation actuator-support assembly. a. Remove the four nuts, four washers, and four bolts securing the support assembly to actuator. b. Remove the elevation drive propeller shaft. 6. Install elevation actuator-support assembly. a. Position bearings on the actuator trunnion and install the support so the bearings rest in the support groove. b. Adjust the shims thickness. c. Install the shims. d. Install the four bolts, washers, and nuts. e. Tighten the nuts evenly and torque. 7. Install the splined yoke. 8. Install elevation drive propeller shafts. 9. Verify elevation actuator-support assembly is operational. 10. Remove both jury struts. 11. Move rocket launcher in elevation. 12. Complete maintenance forms, if required. 1 October 2014 3-23