MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 51 of 188
STP 9-94P1-SM-TG 8. Connect the flexible drive shaft to the speed reducer. 9. Verify the azimuth drive speed reducer is operational. 10. Complete maintenance forms, if required. Evaluation Preparation: Ensure all items required in the condition statement (or appropriate substitutions) are on hand and all safety requirements are met. Performance Measures GO NO-GO 1. Performed a visual inspection of the azimuth drive speed reducer and corrected any defects. _____ _____ 2. Removed azimuth drive speed reducer. Ensure you mark the _____ _____ X-mark on the base. 3. Installed the azimuth drive speed reducer along with the _____ _____ shims and four bolts/washer to secure reducer. 4. Positioned the pinion gear X-mark between the X-mark on _____ _____ the geared bearing. 5. Aligned the azimuth geared bearing X-marks with the X-mark _____ _____ on the base. 6. Ensured that the pinion gear and gearing teeth were parallel. _____ _____ 7. Connected the hydraulic hose to the speed reducer. _____ _____ 8. Connected the flexible drive shaft to the speed reducer. _____ _____ 9. Verified that the azimuth drive speed reducer was operational. _____ _____ 10. Completed maintenance forms, if required. _____ _____ Evaluation Guidance: Score the soldier GO if all performance measures are passed (P). Score the soldier NO-GO if any performance measure is failed (F). If the soldier fails any performance measure, show what was done wrong and how to do it correctly. References Required DA Form 2404 DA Pamphlet 750-8 TM 9-1425-646-10 TM 9-1425-648-13&P TM 9-243 1 October 2014 3-21