MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 49 of 188
STP 9-94P1-SM-TG 091-94P-1009 Replace the Azimuth Drive Speed Reducer DANGER Follow all Danger warning in TMs WARNING Follow all warning in TMs CAUTION Comply with all unit/shop SOP Conditions: Perform this task in a operational environment given an armored vehicle- mounted M270A1 rocket launcher; a faulty azimuth drive speed reducer; DA Form 2404, Equipment Inspection and Maintenance Worksheet; one 94P MLRS repairer and one 13M MLRS crewmember to assist as required; shop set and tool kit; caps and plugs; TM 9-1425-646-10; TM 9-1425-648-13&P; TM 9-243, and DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: The azimuth drive speed reducer was replaced according to the applicable technical manuals (TM). Perform this task without causing injury to self, other personnel, the environment, or damage to equipment. CAUTION! Use only a few drops of lubricating oil to loosen screws, nuts, and bolts. Use rags to contain any excess oils or grease. Handle disposal of hazardous materials and hazardous waste (such as, ethylene glycol, brake fluid, oil, grease, solvents, and contaminated rags) in accordance with unit Standing Operating Procedures (SOP)/Operations Orders (OPORDs), local regulations, and/or host nation laws. Comply with unit SOP, OPORDs, local regulations, and/or host nation laws for drip pans or secondary containment devices. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Perform a visual inspection of the azimuth drive speed reducer and correct any defects. Check the following items listed below. 1 October 2014 3-19